.            . .
     aaaA heat gun, tie wraps and clear shrink tubing available at better electronic shops. We need to tame this mess !
 

... . 
    Shrink sleeve is started on the inner lead , then wraped to prevent it from touching the main
   mast clamp. I like to remove the upper dome bearing assembly  for this, as it tough to get the servo
   in the hole with the tie wraps already on it. The removal of the dome bearing and mast make it possible
   to tie wrap the servo wire with the servo installed. Only two servos need this...
 

   ..            ...
   This fIrst lead is blended into the next wire, two wires per sleeve. I like to shrink-in the extenstions
     so they cannot come loose. Clear sleeve make inspection easy .

   ...             ...
     The wires shrunk and tied with pressure line... fuel lines are wraped in sprial wire casing available
     from "Radio- Shack" 1/4" size.

Page 2
 

copyright 2000 V-EAST.
any reproduction \copy of the images or text on this website is strictly prohibited.