.       . .
 Barrels soldered in place.....                                                                    Main housing soldered to pan....

..           .. .
Tubes cut to make up the various sizes needed to taper, and detail the barrels.

.      
  Wood center made up and installed with jb weld epoxy.                        Tubes are in place here.....

.      . .
 The F.L.I.R. system . 2 ply circles made on a dremel bit , balsa post c/a'd in place then on to the ABS.

.      . .
ABS sheet in place, pre sanded and tack in regular C/a/ glue. NO kickers! it will destroy plastic.

© copyright 2005 V-EAST.
any reproduction \copy of the images or text on this website is strictly prohibited.
                                .