UNI-2000 system build-up
On-line support Build-up
UNI-2000 system build-up
Welcome once again to another on-line support build-up. As always
these pages are meant to clarify and augment, not replace the manufactuers
instructions. Use these tips to help you clear up any questions you may have.
Also feel free to e- mail us anytime...! Enjoy!Download ZIP file of english instructions complete here!
Here are the basic components in their respective bags.
Very low parts count with CNC machined delrin gears,Alu-rotor
head and new larger blade grips along with a choice of 4 different
gear ratio combinations to accomodate .61-.91 motors....
Ratio options: must be ordered with mechanics...all four part numbers per application.
Swashplate & clutch bells are aluminum and all gears are CNC cut H.D. Delrin.For: O.S. MAX .61 RX-HGL or SX motor Ratio: 9:1
4448.124 clutch bell
4448.79 centrifigal clutch
4448.77 taper collet
4448.107a ring gear
For :O.S. MAX 91 FX-HGL motor Ratio: 7.7:1 (very quiet with good reserve power)
4448.126a clutch bell
4448.79a centrifigal clutch
4448.77 taper collet
4448.107c ring gearFor :O.S. MAX 91 FX-HGL motor /C-Spec Ratio: 10:1 (For large rotor diameters up to 1800 mm )
4448.122 clutch bell
4448.79a centrifigal clutch
4448.77 taper collet
4448.107a ring gearFor :O.S. MAX 91 FX "aero" motor Ratio: 7.7:1 (very quiet with good reserve power)
4448.126 clutch bell
4448.79a centrifigal clutch
4448.77a taper collet
4448.107c ring gear
...
This is the aluminum rotor head center piece supplied as standard for Uni-2000 system.The first stage of construction
begins as we assemble the tail drive unit.
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
© copyright 2003 V-EAST.
Any reproduction \copy of the images or text on this website is strictly prohibited.V-East
P.O Box 35-7684
Gainesville, Fl
U.S.A
32635-7684
352-371-3132 ph.
