Description

• Computer-controlled universal fast charger
• With integrated lightweight switch-mode mains PSU for 100 ... 240 V and 12 DC inputs
• This means that the charger is the perfect choice for all mobile applications, and also for use abroad (USA / Japan)
• Two equal-value independent or dependent (CV-link mode) charge outputs
• Additional 12V DC output max. 5A, e.g. for fans, Peltier coolers
• Graupner Balancer socket for 2 x 1 ... 7 NiCd / NiMH / LiPo / LiIo / LiFe cells
• 60 memories for storing all essential battery parameters
• Automatic charge, discharge, capacity measurement, battery maintenance, and conditioning programs for all NiMH, NiCd, LiPo, LiIo, LiFe batteries used in modeling
• Ultra-simpleto operate, with clearly arranged program structure, six keys, and rotary knob
• Two high-contrast LCD screens (128 x 64) with blue backlighting: 21 x 8 characters for displaying all relevant parameters or charge / discharge curves
• Charge / discharge capability for NiMH, NiCd, LiPo, LiIo, LiMn, LiFe or Pb (lead-acid) batteries
• Delta-Peak cut-off detector for NiMH and NiCd cells with variable Delta-peak voltage, ensuring 100% full battery charging
• Capable of charging single cells, therefore ideal for glow energizer batteries and for cell selection processes
• Charges LiPo, LiIo, LiFe and lead-acid cells using constant current / constant voltage method
• Declining current curve after final charge voltage, with automatic charge termination.
• Charge processes: 'NiCd / NiMH: 'automatic, normal, linear, GMVIS, IMPULSE, REFLEX, REPEAK, staged charging
• LiPo / LiIo / LiFe: 'automatic, CC/CV
• Quick charge program, CV-link, storage program
• Balancer program
• Special discharge balancer program for NiCd/NiMH batteries
• Data memory for comparing all important battery data
• Lead-acid battery charge programs with optimised charge curve, discharge facility, variable discharge current for determining battery capacity and residual capacity
• Program for tyre heating covers Order No. 94711 with temperature control
• Motor run-in and test functions for brushed electric motors
• Power supply unit function: variable voltage and current limiting
• Protected against short-circuit, overload and reversed polarity
• Switchable buzzer, selectable melody
• Variable safety timer
• Variable max. charge capacity
• Selectable language: English / German / French / Italian
• Internal battery resistance display
• Single cell voltage display for 2 x 2 - 7 cells in NiCd / NiMH / Li modes
• PC-USB interface for displaying battery curves on the PCscreen
• Ready to connect

Specification

Discharge current : (2 x max. 80 W) 0,1 ... 10 A
All-up weight, approx.: 2250 g
Max. discharge current: 0,1 - 10 A
Charge facility: 1 ... 18 NiMH-/NiCd-Zellen, 1 ... 7 LiPo-/Lilo-/LiMn-/LiFe-Zellen, 1 ... 6, 12 Pb-Zellen
Output voltage: Ausgang 3 (max. 5 A): 12 V
Max. balancing current: NiMH/NiCd: 300 mA, LiPo/LiIo/LiFe: 1000 mA
Charge output: 2
Dimensions (LxWxH): 230 x 225 x 83 mm
Disconnection NiMH/NiCd: Delta Peak einstellbar
Charge current, A: im Netzteilbetrieb (insgesamt incl. Ausgang 3 max. 120 W),
im 11 ... 15 V DC-Betrieb (insgesamt max. 360 W: max. 2 x 180 W oder
1 x 250 W Ausgang 1 oder 2 + 60 W Ausgang 3) 2 x 0,1 A ... 20 A A
Operating voltage : 11 ... 15 V/40 A DC oder Netzteil AC 100 ... 240 V
Balancer socket: 2x 1 ... 7 NiMH/NiCd/LiPo/LiIo/LiFe-Zellen

Instructions USB-driver 

UDP Manager Graupner Firmware Upgrader

Getting started

Logview