Special order item:

Scale model of the latest version type "E"of the proven multi-purpose helicopter manufactured by AGUSTA .

The vertical stablilizer is of drastically reduced size compared with the model's predecessor, and this requires less power from the tail rotor for sideways and reverse flying. 

The retractable landing grear is simplier and more robust and the inward retracting main gear operate in scale manner.

Specifications:

length 1525mm
fuse width (excluding rotor) 300mm
overall height 440mm
all up weight min approx 4600g.

Product information:

The white pimented GRP fuselage features no internal bulkheads and is supplied with openings.  The top opening is so large that the uni-expert or uni-mechanics 2000 can be installed completely assembled including muffler. 

The mechanical system is then attached the fuselage floor by means of four screws, and braced by two further attachement points at the top.  As standard the tailrotor drive system is based on a 2mm spring steel shaft, but the alternative rigid drive system can also be accomodated; This system is used in the ULTRA-STAR 2000, and is available as a tunning acessory under part number 4451.100. The GRP tail rotor control linkage, part number 4448.105 can also be fitted. 

The mechanically actuated retractable undercarriage is available  under part number 4458.4.  The motor is started from above by means of a hexagon starter adaptor with free wheel part number 1631.

Kit contents:

Building instructions in German, English, French.  Lightweight multi -sectional fuselage in epoxy-fiberglass, with high-gloss white-pigmented surface and most openings are factory pre-cut.  Wooden parts, pre-cut clear smoked tint
windows, tail rotor shaft with bush, tail-rotor control pushrod, vaccum molded stablilizer panels, small parts.

Optional Accessories

 
# 4458.4.  - Retracts Set
# 4458.99 - Decal Sheet
# 1174 - Scale Accessories
# 4448.103 - Hexagon Start Cone
# 2240 - Tuned Pipe
# 2239A - Tuned Pipe Header