.....
....
Goop is loaded into a syringe and windows are glued and sanded, next comes pre-
painting the frames black which will be clear coated with the entire fuse.Windows
will then be buffed using 1200 grit paper and polish. The reuslts are outstanding
go here to to see a model that has been done like this.
.....
I use a torch
on the blade to cut the glass with losing too much matierial. I decided
I wanted this
scoop to be fully scale. I cut the opening almost all the way, then pushed
it
down .
....
.
Sides sre then
formed using scrap and tack ca glued til final epoxy is layed in.
Excess will be
trimed after gluing.
....
...
A little
sanding and blending and we are almost there....