. ......
Dauphin
N-4
build-up
presented to you by Sandy Alan Squitieri . PAGE 26
Detail and finishing procedures...
..
..
Metal tape is used to enhance surface
detail so that it doesnt become minimized by clearcoats. Burnish the tape
bu using a smooth object(spoon) , then sand with 220 paper to level it
out. You can also
use filler is need be, but try to do any bodywork before you apply tape.
..
..
After a little prime you can really see
it pop out. On the belly I wanted to enhance the belly panel- lines , so I
used 1/32 tape ove the grooves and primed OVER the tape several times.
.. ..
As you peel
the tape with the primer still tacky, you can see the results. After a
lite scuffing they look
even neater. This will ensure crisp lines that will later be inked in with
micro fine lines.
..
..
Carbon sheet
was used to form inner wheel wells, thin ply cn also be used.Glassed in
from inside. My lady is all
dressed and ready to go to orlando for a primer makeover. Stay tuned I have picked
a scale scheme that is unbelievable! So a week break from Our Lady and on to other
back logged projects and schedules.
.
.
.
.
.
.
. .
.
.
.
.